5 Reasons That’s Why Toilet Has Weak Flush 

One of the most common problems to face that’s why the toilet does not flush. Is the toilet going to overflow?  a toilet leaking from the tank to the bowl? Or any other problem regarding the toilet.  When you see the problem the first situation may be fearfulness for homeowners. A toilet that won’t flush is appropriately a common problem that’s usually easy to repair and this is not a reason to take stress. Snake Master will explain some of the main causes of clogged toilets so that you can fix the problem as soon as possible. Remember that with all home DIY projects, safety is key. If you don’t feel comfortable doing something, it’s best to leave it to a professional plumber. 

Your toilet has a weak flush because of the following problems  

Toilet is blocked  

Using too much paper or trying to flush anything other than toilet paper down can block the pipe and make further flushing impossible. Sanitary napkins are a common problem behind such blocks.  

Use a plunge to create suction that will help dislodge paper waste that is preventing the flushing action and allow it to flow down the pipe, or use a toilet auger or plunger to force waste through and enable the toilet to flush. For example, if you or other household members use a lot of paper in one sitting, you might want to think about switching to a thinner type of paper if you frequently experience clogs. 

Low water in the toilet bowl 

There are several causes of clogs including excessive paper use and flushing something other than paper down the sanitary napkins are typically responsible for such clogs.   

To ensure that the tank is filled to the correct level turn on the water valve and flush and make sure it is washing properly.  

The toilet handles not flushing 

Inspect the flushing handle and make any necessary adjustments if it’s too tight or loose. When tightening or loosening flush handles, you often turn the nut in the opposite direction from how it was intended to be turned. 

Examine the flush lever lift arm and make any necessary corrections or replacements. It’s a good idea to bring the old handle/lift arm assembly with you when you buy a new one to ensure that you get the right one. 

Verify the lift chain’s connections with the lift arm and the flapper at the flush valve’s base. If necessary, untangle or correct. 

Inspect the flapper to make sure it closes the flush valve hole. Updating a deformed or broken flapper is essential. 

The flapper is broken or warped 

Examine the rubber flap after removing the tank lid. The rubber flapper’s function is to release water when the toilet is flushed and then to seal the water intake hole afterward to ensure that the correct volume of water is kept in the tank. You should replace your toilet’s rubber flapper if it appears to have degenerated or is too warped, bent, or misshapen to cover the flush tube hole.